Egtex is dedicated to providing an excellent product experience and superior customer support. Learn all the features and functionality of Egtex with informative and easy-to-understand user guides.

ORIGIANL

AQUEOUS, Latex, UV Inks.


• Translucent, 70% opacity

• Glass, Walls, Elevators, Doors

• Columns and pillars

• No time limit for removal

ORIGINAL (L) HIGH TACK  

AQUEOUS, Latex, UV Inks.


• Original, 50% Stronger Tack

• Certified indoor floors decals

• Textured walls and stadiums

• Removable at any time

SHEID 

AQUEOUS, Latex, UV Inks.


• 99% Block out

• Murals and wallpaper

Hides overlapping panelsums

cutouts

ORIGIANL (S)

SOLVENT, ECO-SOLVENT, LATEX, UV Inks


• Translucent, 70% Opacity

• Glass, signs, elevators, doors

• Water resistant; No need to laminate

• Outdoor use

ORIGIN
(HS) HIGH TACK

SOLVENT, ECO-SOLVENT, LATEX, UV Inks


• Original, 50% Stronger tack

• Certified indoor floors decals, Tetured walls

• Water resistant; no need to laminate

SHEID 

SOLVENT, ECO-SOLVENT, LATEX, UV Inks


• 99% Block out

• Murals and wallpaper

Hides overlapping panelsums

cutouts

PAINT, PRIMER & BOND ADDITIVE SUGGESTIONS

Installation Tips for Paint with Additives

WHAT WE OFFER

VERSIONS, SIZES, INKS

FAQS & TIPS

If you are using Solvent or Eco-solvent inks, then we do recommend a clear coat or liquid laminate when using outdoors or in high traffic areas. See installation and technical bulletin for more information.

Always liquid laminate EGTEX with the liner/backer still on the material. If already installed then do not liquid laminate to the edges while on the wall as the liquid can seep around the edges and on the adhesive.

Some thin 1.5-2.0 mil Cold Laminate may work fine, but we recommend liquid laminating or clear coating.

Yes, you can paint or use magic markers with blank EGTEX.

Yes, you can kiss-cut or contour cut the material with a high steel blade (carbide) or sharp blade. Slow the speed down some if needed and turn on over travel.

Green color is water-vased mark on box. The blue colcor is oil-based mark on box.

We sell through a one channel(Homepage) covering all of Vietnam, Indonesia, Thailand, Singapore, Philippines, China, Australia, Korea.
Visit our contact page to view the appropriate contact for your country or contact us.

Yes, based on widths of 60” and lengths up to 300 feet. Please contact us for any inquiries. Min order may apply.

Yes, we stock sheet sizes up to 20”x20”. Great for Lithographic and DI printers

To date, the only thing we found that works best is EGTEX. We sell discounted 24” odd length rolls that you can use as transfer tape. Email EGTEX for any additional questions .

All EGTEX cores are 3″.

You need to wait at least 30 days after a wall has been freshly painted as the paint needs to out-gas. Otherwise, you will get veins, bubbles and tunnels from the paint out-gassing.

Yes – Yes – Owner of KIMSUNGYOON from Korea can install anywhere. You can reach KIM at 010-3072-3391

TEL : 031-677-1936

FAX :031-677-1932

PRODUCT SUGGESTIONS

  • Do not use painters masking tape with latex inks unless you remove at a slow pace, otherwise you can rip the ink off.
  • Do not use Just Alcohol – you will need to mix 70% Alcohol with 30% water to clean walls – (needed with Low and No Voc Paints) otherwise just warm water & dab of dawn soap on a frayless towel to clear dust.
  • Use a plastic or cloth squeegee when installing the Opaque versions as hands may leave bubbles, especially on texture surfaces. Press Hard into surface to get max. adhesion
  • Always allow 30 days on a freshly painted wall before installing (paint out-gasses).
  • CAUTION: DO NOT INSTALL ON WALLS PAINTED WITH THE PROMAR 200/400 ZERO VOC PAINT WITHOUT WIPING IT DOWN 2-3 TIMES WITH 70% ALCOHOL 30% WATER MIXTURE WITH FRAYLESS CLOTH. (PREFER YOU DO THIS WILL ALL NO/LOW VOC PAINTS FOR BEST RESULTS ). tack can increase by 20%. 
  • DO NOT APPLY – Acryl ADHESIVES it will bubble.  
  • Latex printers heat settings are not to be above 190 degrees (some profiles are set at 220  Fahrenheit. )
  • Do not wrap around corners with Opaue versions as they will air pocket – ie. Pillars, corner wall turns.
  • INSTALLATION DISCLAIMER  & PRECAUTION : Due to all the variables of the wall surface and recently the (NEW) paints, along with choosing the correct Egtex versions.  Our products should not be installed within a distance in which infant/children sleep and/or occupy without continuous adult supervision.


Do not use the Opaque versions on glass, metal and vinyl  – please use the original non-opaque versions. The Opaque coating is on the adhesive side and can cause removal residue issues outdoors in very high or low temperatures.


ROMAN Do not cut the overlap when using UV/Latex inks and “opaque” Egtex as you may see a white line from the cutting. Opaque is a block-out intended to not have to mid-cut the overlap area to butt.



SHIPPING

We stock over 32 SKU’s from our 1,000 square foot warehouse in ansung, Korea. 

At Egtex, we strive to ensure you get the solutions you need in a timely manner.

Many of our dealers/distributors stock Egtex locally, so please contact us.

Product Performance & Suitability

All of the descriptive information and recommendations for the use of Egtex products should be used only as a guide. Furnishing such information and recommendations shall in no event constitute a warranty of any kind by Egtex Group Inc.


All purchasers of Egtex products shall independently determine the suitability of the material for the purpose for which it is purchased. Seller’s and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Neither the seller nor manufacturer shall be liable either in tort or in contract for any loss or damage, direct, incidental or consequential (including loss of profits or revenue) arising out of the use of or the inability to use the product.


No statement or recommendation not contained herein shall have any force or effect unless in agreement signed by officers of seller and manufacturer.